Agilent Technologies R Series, Руководство пользователя

Страница: 150 / 220

Chapter 5: Maintenance and troubleshooting
BenchCel Microplate Handling Workstation R-Series User Guide
116
3. In the Plate Dimensions (mm) area, type a new value for the
following:
Parameter Description
Thickness The distance, in millimeters, from the
bottom surface of the microplate to
the top surface of the microplate.
For a tip box, this is the distance from
the bottom surface of the box to the
top of the tips.
To increase the number of contact
points, measure the distance at the
corner of the microplate or tip box
(using calipers). This method is
especially useful if the microplate has
a lip at the top and the caliper can
angle inward, producing inaccurate
measurements.
Stacking thickness The thickness, in millimeters, of two
stacked plates minus the thickness of
one plate.
For example:
Thickness of two stacked plates
(
x ) = 23.14 mm
Thickness of one plate = 14.14 mm
Stacking thickness: 23.14 mm -
14.14 mm = 9.00 mm
thickness
Plate Thickness
Stacking Thickness
x