Agilent Technologies Pump Module, Оригинальное руководство пользователя

Страница: 10 / 34

Pump Module User Guide
Pump Module overview and components
8 Pump Module User Guide
Pump Module overview and components
Overview
The Pump Module contains two peristaltic pumps, one that pumps the fresh
source fluid into a reservoir, and a second one that pumps the waste fluid
from the reservoir. Optionally, you can use the Pump Module with an Agilent
Weigh Station, Weigh Shelf, or Weigh Pad to provide precise liquid- level control
for an autofilling reservoir or wash station.
Components
The following figure shows the primary components and the table provides
descriptions of each component.
Figure Pump Module front view (left) and rear view (right)
Item Feature Description
1
Power
switch Turns on or turns off the power.
2 Peristaltic
pump Pumps fluid in either a forward or reverse direction, as
specified in the automation control software. Each pump
has a flip- top cover that enables you to route the tubing.
3 AC power
connector Connects the power cable.
4
SHELF A
port Connects the communication cable from a Weigh Shelf,
Weigh Station, or Weigh Pad to the Pump Module.
1
2
100V-240V
50/60Hz
1.5 Amps
3
4
5
6
7
8