Agilent Technologies PlateLoc, Руководство пользователя

Страница: 62 / 144

Chapter 3: Getting started
PlateLoc User Guide
48
Checking for argon
flow
You can check for argon flow using a test plate, such as the OxoPlate
(Innovative Instruments, Inc., www.3i-usa.com/product_oxoplate.html)
or equivalent. Test plates can indicate the amount of oxygen displaced.
For instructions, see the manufacture’s user documentation.
Checking the
internal argon
pressure
You do not need to check the internal argon pressure. Make sure the
argon pressure from your lab is 0.28 MPa (40 psi).
Turning off the
argon For safety reasons, the Gas-Purging PlateLoc automatically turns off the
argon inside the device immediately before the seal is applied.
Velocity11 recommends that you turn off the argon at the source (house
or cylinder) when the Gas-Purging PlateLoc is not in use.
Related topics
For more information about... See...
The Gas-Purging PlateLoc “Description of the PlateLoc” on page 2
Lab requirements “Meeting Lab requirements” on page 23
Connecting the PlateLoc to the
power source “Connecting the power source” on
page 30
Connecting the PlateLoc to the
argon source “Connecting and disconnecting the
argon source (Gas-Purging PlateLocs
only)” on page 34
Turning on the PlateLoc “Turning on and turning off the power”
on page 42