manualshive.com logo in svg

Agilent Technologies Magnis Dx NGS Prep System, Руководство пользователя

Поделиться
Скачать
Agilent Technologies Magnis Dx NGS Prep System Скачать руководство пользователя страница 46

Magnis and Magnis Dx NGS Prep System User Guide

46

11

Press 

Close

.

You are returned to the Protocols screen. The new protocol is now listed. 

Download a protocol from the Agilent website

1

From the Home screen, press 

Settings

.

The 

Settings screen

 opens.

2

Press 

Protocol Update

. 

The 

Protocols screen

 opens

3

Press 

Update Protocol

.

The 

Protocol Update screen

 opens.

4

At the top of the screen, select 

Online Download

.

The screen displays the protocols available for online download.

5

Mark the protocol(s) that you want to download and install.

Figure 29

Protocol Update screen with protocol file selected online

6

Press 

Download

.

A message box opens notifying you that the protocol was downloaded.

7

Press 

OK

 to close the message box.

You are returned to the Protocol Update screen. The protocol has been installed.

8

Press 

Close

.

You are returned to the Protocols screen. The new protocol is now listed. 

Change the default version for a protocol

When setting up a protocol run, the system uses the default version of the selected protocol. 

1

From the Home screen, press 

Settings

.

The 

Settings screen

 opens.

2

Press 

Protocol Update

. 

The 

Protocols screen

 opens, listing all protocols on the system.

Содержание Magnis Dx NGS Prep System

































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды