Agilent Technologies M1205A V24, Руководство по обслуживанию, Страница: 296 / 358

$JLOHQW0$996HULHV6HUYLFH*XLGH
5HPRYLQJ 5HSODFLQJ3OXJLQ0RGXOHV
Remo
vi
ng &
Rep
lac
in
g
Plu
g
-in
Mo
du
les
5HFRUGHU0RGXOH3DSHU
The recorder will not run when the door is open or when the recorder is out of paper. To
prevent damage to the recorder module, use only Agilent approved paper (Agilent re-order
number 40477A/B)
7R/RDG3DSHULQWRWKH5HFRUGHU0RGXOH
6WHS
Remove the empty core from the previous roll of paper.
6WHS
Cut off and discard the first few inches of paper to eliminate any traces of adhesive.
6WHS
Pull out several inches of paper from the new roll, holding the roll with the loose end
hanging over the top toward
you.
6WHS
Open the door and push the paper roll into the holders in the recorder.
6WHS
Thread the paper under the roller and over the plastic shelf far enough so it goes
around the roller and comes out above it.
6WHS
Drape the paper over the end of the door and close the door. The paper should be vis-
ible and draped down in front of the door.
5
STEP
PLASTIC
SHELF
PAPER
ROLLER
3
STEP
6
STEP