Agilent Technologies Keysight N9310A, Руководство пользователя

Страница: 11 / 188

Overview 1
N9310A User’s Guide 5
•
FM
configures a frequency modulation.
•
F
M
configures a phase modulation.
•
Pulse
configures a pulse modulation.
•
I/Q
actives an I/Q modulation.
•
Sweep
configures RF/LF/Amplitude sweep.
•
Trigger
triggers an armed sweep.
•
Utility
sets the system configurations
•
Local
returns the signal generator from remote to local.
•
File
saves, recalls or deletes customized configuration files.
•
LF Out
configures a low frequency signal.
7 Mod On/Off
Pressing hardkey toggles the modulator
state between On and Off. A
MOD On/Off
annunciator is
visible on the screen, indicating whether the modulator is
enabled or not.
You also have to activate each individual modulation (for
example,
> AM On
), otherwise no modulation is applied
to the output carrier signal, even though the modulator is
enabled (
MOD On
).
8 Knob
The knob increases or decreases a value or a numeric
digit, or moves to select an item up and down in a list.
9 Arrow keys
The left and right arrow keys shift the selected
digit in the active entry area of the display; Once an
individual digit is selected, you can change its value by
rotating the knob.
10 RF On/Off
The hardkey toggles the RF output state
between On and Off. A
RF On/Off
annunciator is always
visible on the display, indicating whether the RF output is
enabled or not.
11 RF Out connector
This female N- type connector provides the
output for RF signals. The impedance is 50 ohm. The damage
level is +36 dBm maximum.
Mod
On/Off
AM
RF
On/Off