manualshive.com logo in svg

Agilent Technologies J-BERT N4903B, Руководство пользователя, Страница: 76 / 572

Поделиться
Скачать
Agilent Technologies J-BERT N4903B Скачать руководство пользователя страница 76

N O T E

Once the pattern of a specific length is captured from the error detector , it can be
sent back to the error detector and the pattern generator. For later use of this
captured pattern it should be saved using "SaveAs" option. The user will be
prompted to save the captured pattern if a new pattern is loaded, and the same
pattern is recaptured.

User Patterns - Reference

The elements of the pattern editor and all dialog boxes that can be opened from

the pattern editor are described below:

Edit Pattern Window

The 

Edit Pattern

 window provides the following convenient pattern editing

functions:

Table 9

Icon

Name

Description

Toolbar Ctrl

Click this icon to switch
the toolbar from two rows
to a single row
appearance, leaving more
space for the pattern data.

New

Click this icon to create a
new pattern. See

“Creating New Patterns”
on page 71

 for details.

Open

Click this icon to open a
pattern from a file. See

“Opening Existing
Patterns” on page 71

 for

details.

Save

Click this icon to save the
current pattern. If it was
not previously saved, a
Save As dialog box opens
for you to specify name
and path for the file.

3

Setting up Patterns

76

Agilent J-BERT N4903B High-Performance Serial BERT

Содержание J-BERT N4903B





























































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов