G4208A User’s Guide
68
2
Working with the Instant Pilot
Working with Methods
Compare Methods
The
Compare
screen is a tool that allows you to compare two methods. The
differences are shown in a list by displaying the values from both methods side
by side. You can copy parameters between the two selected methods using the
Copy
function.
Figure 43
Method - Compare screen
If there are differences in the configuration and/or timetable, a message is
shown in the status line, and you can view the differences via
Config
.
Displayed Method
is the actual loaded method (modified), e.g. WOLF*
Internal Method
is the actual loaded method (not modified), e.g. WOLF
Copy parameter left to right
Copy parameter right to left
Exits this screen
Saves the settings and leaves
the screen
Config: view configuration
differences
NOTE
If the configuration differs, only the differences of the configuration are shown.
