Agilent Technologies InfiniiVision DSO6014L, Руководство пользователя

Страница: 307 / 371

306 6000 Series Oscilloscope User’s Guide
7 Saving and Printing Data
To print the display to a file
1 To print to a file, connect a USB mass storage device to the
USB port on the front or the rear of the oscilloscope.
2 Access the Print Config menu by pressing Utility
&
Print Config .
3 Choose a format using the Print to softkey.
4 Press the second softkey from the left and use the Entry knob
to browse to a location where you would like to save the
image file. You can select among connected USB mass storage
devices, and you can choose a subdirectory if desired.
5 Press the Quick Print key on the front panel
6 To make subsequent printouts, simply press the Quick Print
key.
N O T E
If two USB mass storage devices are connected to the oscilloscope, the
first one is designated “drive0”” and the second one is designated
“drive5,” not “drive1.” This numbering method is normal; it is inherent in
the USB driver.