manualshive.com logo in svg

Agilent Technologies InfiniiVision 3000 X-Series, Руководство программиста

Поделиться
Скачать
Agilent Technologies InfiniiVision 3000 X-Series Скачать руководство пользователя страница 2

Notices

© Agilent Technologies, Inc. 2005-2012

No part of this manual may be reproduced 
in any form or by any means (including 
electronic storage and retrieval or transla-
tion into a foreign language) without prior 
agreement and written consent from Agi-
lent Technologies, Inc. as governed by 
United States and international copyright 
laws.

Manual Part Number

Version 02.10.0000

Edition

March 1, 2012

Available in electronic format only

Agilent Technologies, Inc.
1900 Garden of the Gods Road 
Colorado Springs, CO 80907 USA

Warranty

The material contained in this docu-
ment is provided “as is,” and is sub-
ject to being changed, without notice, 
in future editions. Further, to the max-
imum extent permitted by applicable 
law, Agilent disclaims all warranties, 
either express or implied, with regard 
to this manual and any information 
contained herein, including but not 
limited to the implied warranties of 
merchantability and fitness for a par-
ticular purpose. Agilent shall not be 
liable for errors or for incidental or 
consequential damages in connection 
with the furnishing, use, or perfor-
mance of this document or of any 
information contained herein. Should 
Agilent and the user have a separate 
written agreement with warranty 
terms covering the material in this 
document that conflict with these 
terms, the warranty terms in the sep-
arate agreement shall control.

Technology Licenses 

The hardware and/or software described in 
this document are furnished under a 
license and may be used or copied only in 
accordance with the terms of such license.

Restricted Rights Legend

If software is for use in the performance of 
a U.S. Government prime contract or sub-
contract, Software is delivered and 
licensed as “Commercial computer soft-
ware” as defined in DFAR 252.227-7014 
(June 1995), or as a “commercial item” as 
defined in FAR 2.101(a) or as “Restricted 
computer software” as defined in FAR 
52.227-19 (June 1987) or any equivalent 

agency regulation or contract clause. Use, 
duplication or disclosure of Software is 
subject to Agilent Technologies’ standard 
commercial license terms, and non-DOD 
Departments and Agencies of the U.S. Gov-
ernment will receive no greater than 
Restricted Rights as defined in FAR 
52.227-19(c)(1-2) (June 1987). U.S. Govern-
ment users will receive no greater than 
Limited Rights as defined in FAR 52.227-14 
(June 1987) or DFAR 252.227-7015 (b)(2) 
(November 1995), as applicable in any 
technical data.

Safety Notices

C A U T I O N

A CAUTION notice denotes a haz-
ard. It calls attention to an operat-
ing procedure, practice, or the like 
that, if not correctly performed or 
adhered to, could result in damage 
to the product or loss of important 
data. Do not proceed beyond a 
CAUTION notice until the indicated 
conditions are fully understood and 
met. 

WA R N I N G

A WARNING notice denotes a 
hazard. It calls attention to an 
operating procedure, practice, or 
the like that, if not correctly per-
formed or adhered to, could result 
in personal injury or death. Do not 
proceed beyond a WARNING 
notice until the indicated condi-
tions are fully understood and met.

 

Trademarks

Microsoft®, MS-DOS®, Windows®, Win-
dows 2000®, and Windows XP® are U.S. 
registered trademarks of Microsoft Corpo-
ration.

Adobe®, Acrobat®, and the Acrobat 
Logo® are trademarks of Adobe Systems 
Incorporated.

Содержание InfiniiVision 3000 X-Series

















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды