Agilent Technologies G7116A, Руководство пользователя

Страница: 63 / 203

Agilent InfinityLab LC Series Multicolumn Thermostats User Manual 63
3 Using the Module
Install the Divider Assembly
Install the Divider Assembly
Parts required p/n Description
G7116-60006 Divider Assembly MCT
NOTE
The Divider Assembly must be installed if different temperatures are used on the
right and the left heater element to separate these two temperature zones.
1 Push the rear part of the Divider Assembly into position
(1.) and fix it with the screw (2.). 2 Install the valve head if used.
See
“Replace Valve Heads” on page 135.
3 Install all capillaries and heat exchangers required.
For details, refer to
“Install Heat Exchanger” on page 48,
and “Exchange a Column” on page 52.
4 Install the front part of the Divider Assembly by putting
it on top. 5 The front plate should be flush with the top and the bot -
tom edge of the MCT housing.
1.
2.