Agilent Technologies G1323A Скачать руководство пользователя страница 16 | Manualshive

Страница: 16 / 170

Agilent Technologies G1323A Скачать руководство пользователя страница 16

16

1200 Series Handheld Control Module Users’s Guide

1

The Agilent 1200 Series Control Module

Control Module Features

Control Module Features

The control module provides complete local control and monitoring of a single
module or an entire Agilent 1200 Series system. You have easy access on every
supported function, you can easily control all parameters and settings and you
can configure various communication channels with other devices, in order to
comfortably analyze the generated data.

•

Install any desired configuration of Agilent 1200 Series modules. The
control module software will reflect which modules are present in the LC
system and adjust the screens accordingly.

•

Enter parameter settings for every module, perform reset and on/off
functions as well as calibration and configuration settings in a
self-explanatory and intuitive way.

•

Define automated analyses including methods, timetables, injector
programs, method sequences and automated calibration settings using the
control module.

•

Protect your method from any inadvertent keyboard changes by setting
method protection.

•

Use PC cards to store and transfer methods and sequences between
Agilent1200 systems.

•

Monitor all operations and error events using the self-updating logbooks.

•

Use the context-sensitive online information system to get further
information on all topics.

•

Use the context-sensitive menu function to have the quickest access on
related functions.

•

To help comply with Good Laboratory Practice (GLP) regulations you can
select a variety of module tests that will check the performance of the LC
system.

•

The early maintenance feedback (EMF) limits can be used for scheduling
maintenance work.

•

Display data graphically using the Plot screen where as many as three
different signals can be monitored at the same time.

•

Print information to a PCL3 compatible printer connected to the serial
RS232 port of a Agilent1200 module.

«
...
14
15
16
17
18
...
»

Содержание G1323A











































































































































































Отзывы:

Нет отзывов