Agilent Technologies G1323A, Руководство пользователя, Страница: 137 / 170

1200 Series Handheld Control Module Users’s Guide 137
Running Multiple-Vial Analyses 11
Single-Level Calibration Sequences
Single-Level Calibration Sequences
The following procedure describes how to set up a calibration sequence for an
analysis which uses single-level calibration.
There is one calibration standard (C) and 9 samples (S).
The analysis requires that:
•
each sample is analyzed in duplicate,
• the calibration standard is analyzed once before the samples and
re-analyzed once after every 2 samples,
C S S C S S C S S C S S C S C
• the calibration standard is located in position 90 and the 9 sample vials are
in positions 1 to 9 of the autosampler tray, and
• the method called METH1 is used for the samples and standards.
The example assumes that the sequence table is empty. If the sequence table is
not empty, use the All Lines item, accessed by pressing the
Delete button [ F6 ].
1
Select the
Sequence
button [
F4
] in the Analysis screen.
2
For sequence line 1, select the
Insert
button [ F7 ] and enter :
3 Select the Calibration button [ F1 ] to display the Calibration Settings screen for
sequence line 1 and choose Edit .
Vial Range 1 to 9
#Inj. 2
Inj. Volume Default
Method METH1