Agilent Technologies ESG series, Руководство пользователя и программирования, Страница: 61 / 446

Real-Time I/Q Baseband Generator User’s and Programming Guide 2-33
HP ESG Family Signal Generators Using Functions
Options UN8 and 202 Storing User-Defined Files to Memory
Storing User-Defined Files to Memory
While the setup of each type of file may be different, the process of storing a configuration
for later recall and use is the same: use the
Store To File
softkey to store the current
configuration to a file in non-volatile memory.
When the contents of a table editor has not been stored,
(UNSTORED)
appears as shown in
the following example.
If you try to exit a table editor without storing, the signal generator displays the softkey:
Confirm Exit From Table Without Saving
To exit without saving the table, select the softkey. If you do not want to exit, press
Return
.
1. In the softkey menu, press
More 1 of 2
>
Load/Store
. A catalog of files appears, which
lists stored files, and amount of memory both used and available (in bytes).
2. Press
Store To File
. A softkey menu appears that contains letters and symbols that you
can use to name the file.
3. If there are already files in the catalog, the first file is selected, and its name appears in
the active entry area. If an existing file is selected, press the
Editing Keys
softkey, then
select
Clear Text
. The previous page of softkeys returns, and only a cursor appears in the
active entry area following the
Store to:
text.
Indicates that the data in the
table editor has not been stored.
Softkey menu with
letters and symbols Active entry area Catalog of files Memory used and free