Agilent Technologies ESG series Скачать руководство пользователя страница 254 | Manualshive

Страница: 254 / 446

Agilent Technologies ESG series Скачать руководство пользователя страница 254

4-10

Real-Time I/Q Baseband Generator User’s and Programming Guide

Programming Commands and Examples

ESG Family Signal Generators

Programming Commands

Options UN8 and 202

Burst Shape Files, Creating

:MEMory:DATA:SHAPe "<file name>",num_rise_points,rp0,

rp1,...num_fall_points,fp0,fp1,...

This command creates a new burst shape file with the following components:

"<file name>"

Identifies the name of the burst shape file.

num_rise_points

Specifies how many rise points will follow. The range allowed is 2

through 256.

rp0,rp1,...

Defines each successive rise point. Set each point from 0.0 through 1.0,
where 0 is no power and 1 is full power.

num_fall_points

Specifies how many fall points will follow. The range allowed is 2

through 256.

fp0,fp1,...

Defines each successive fall point. Set each point from 0.0 through 1.0,
where 0 is no power and 1 is full power.

:MEMory:DATA:SHAPe? "<file name>"

This command outputs the contents of the specified burst shape file.

:MEMory:CATalog:SHAPe?

This command outputs a catalog of the burst shape files stored in memory.

:MEMory:DELete:SHAPe

This command deletes all burst shape files stored in memory.

Burst Fall Delay

[:SOURce]:RADio:CUSTom:BURSt:SHAPe:FALL:DELay <value>

[:SOURce]:RADio:CUSTom:BURSt:SHAPe:FALL:DELay?

[:SOURce]:RADio:CUSTom:BURSt:SHAPe:FDELay <value>

[:SOURce]:RADio:CUSTom:BURSt:SHAPe:FDELay?

[:SOURce]:RADio:<desired format>:BURSt:SHAPe:FALL:DELay <value>

[:SOURce]:RADio:<desired format>:BURSt:SHAPe:FALL:DELay?

[:SOURce]:RADio:<desired format>:BURSt:SHAPe:FDELay <value>

[:SOURce]:RADio:<desired format>:BURSt:SHAPe:FDELay?

This command sets the burst shape fall delay.

Range: minimum and maximum values depend upon modulation type and symbol rate.

*RST value:

• Custom: 0.000
• DECT: –2.875 bits
• EDGE: 1.200 bits
• GSM: 0.125 bits
• NADC: –1.000 bits
• PDC: –0.500 bits
• PHS: –1.500 bits
• TETRA: 0.000 bits

«
...
252
253
254
255
256
...
»

Содержание ESG series































































































































































































































































































































































































































































Отзывы:

Нет отзывов