manualshive.com logo in svg

Agilent Technologies ESG series, Руководство пользователя и программирования, Страница: 218 / 446

Поделиться
Скачать
Agilent Technologies ESG series Скачать руководство пользователя страница 218

3-148

Real-Time I/Q Baseband Generator User’s and Programming Guide

Softkey Reference

ESG Family Signal Generators

S

Options UN8 and 202

S

S

DECT Format

Press this softkey to make the 16-bit synchronization word (S) the
active function. The preset hexadecimal value (when normal preset is
selected) for synchronization reflects the DECT format. The current
value for S appears in the

S

field near the bottom of the text area of the

display.

Default Values: E98A (RFP timeslots), 1675 (PP timeslots)

DECT:

Mode

>

TDMA

>

DECT

>

Data Format Pattern Framed

>

Configure Timeslots

>

Configure Traffic Bearer

>

S

S

 is also located in the portable part Configure Traffic Bearer menu

and the radio fixed part and portable part Low Capacity menus.

GSM Format

Press this softkey to make the 1-bit binary stealing flag for both
stealing flag fields in the normal burst timeslot the active function.
Although the stealing flag fields accept binary values of zero or one, the
front panel data entry is actually hexadecimal. Any value entered that
is greater than one is automatically clipped back to a value of one.

Default Value: 0

Softkey Location:

Mode

>

TDMA

>

GSM

>

Data Format Pattern Framed

>

Configure Timeslots

>

Configure Normal

>

S

SA

Press this softkey to make the 16-bit slow associated control channel
(SACCH) the active function. The preset hexadecimal value (when
normal preset is selected) for SACCH reflects the PHS format,
displayed in the

SA

 field near the bottom of the text area of the display.

Default Value: 8000

Softkey Location:

Mode

>

TDMA

>

PHS

>

Data Format Pattern Framed

>

Configure Timeslots

>

Configure TCH

>

SA

Or:

Mode

>

TDMA

>

PHS

>

Data Format Pattern Framed

>

Configure Timeslots

>

Control Channel Dnlink Uplink

>

Configure TCH

>

SA

Содержание ESG series































































































































































































































































































































































































































































Отзывы:

Нет отзывов