manualshive.com logo in svg

Agilent Technologies ESG series, Руководство пользователя и программирования, Страница: 178 / 446

Поделиться
Скачать
Agilent Technologies ESG series Скачать руководство пользователя страница 178

3-108

Real-Time I/Q Baseband Generator User’s and Programming Guide

Softkey Reference

ESG Family Signal Generators

I

Options UN8 and 202

I

IDLE

Press this softkey to make the 34-bit idle message (IDLE) the active
function. The preset hexadecimal value (when normal preset is
selected) for IDLE reflects the PHS format. The current value for IDLE
is displayed in the

IDLE

 field near the bottom of the text area of the

display.

Default Value: 000000000

Softkey Location:

Mode

>

TDMA

>

PHS

>

Data Format Pattern Framed

>

Configure Timeslots

>

Timeslot Type

>

SYNC

>

Configure SYNC

>

IDLE

Or:

Mode

>

TDMA

>

PHS

>

Data Format Pattern Framed

>

Configure Timeslots

>

Control channel Dnlink Uplin

k >

Timeslot Type

>

SYNC

>

Configure SYNC

>

IDLE

Insert

Press this softkey to display a menu where you can select different
methods of inserting bits.

Insert

 is located in the Bit File Editor menus.

Insert 1’s

Press this softkey to insert a user-defined number of 1’s at the current
cursor position.

Insert 1’s

 is located in the Bit File Editor menus.

Insert 0’s

Press this softkey to insert a user-defined number of 0’s at the current
cursor position.

Insert 0’s

 is located in the Bit File Editor menus.

Insert Row

Press this softkey to insert a new row directly above the highlighted
row in the currently active table.

Insert Row

 is located in the table editor menus.

Interleave Gating

Use this softkey to select a signal with an interleave pattern for the
output of the rear panel SYMBOL SYNC OUT port.

Softkey Location:

Mode

 >

TDMA

 >

EDGE (Rev 8.3.0Release 1999)

>

BNC MUX Settings

 >

Symbol Sync Out

 >

Interleave Gating

Содержание ESG series































































































































































































































































































































































































































































Отзывы:

Нет отзывов