Agilent Technologies E5810B, Руководство пользователя

Страница: 71 / 157

E5810B Web Access3
E5810B User’s Guide 53
IP Address 169.254.58.10 The Internet Protocol (IP) address of the E5810B is a required
value and is used for all IP and TCP/IP communications with the
E5810B. The IP address is represented in dotted decimal notation
(for example, 154.140.222.201). This number is assigned by the
system administrator.
LAN traffic to the E5810B will be routed by the IP address or by
using a hostname that may be provided by a DNS name server
which is mapped to this IP address. The current E5810B IP address
may have been established in one of these two methods:
• The IP address was provided by a DHCP server during startup
(dynamic IP address).
• The IP address shown on the Current Configuration of the
E5810B LAN/GPIB/USB Gateway page was used. This was set
by default to 169.254.58.10. If DHCP is not used, the IP address
should be set for your network.
Subnet Mask 255.255.0.0 Subnet mask is used to enable the E5810B and determine if a
client’s IP address is on the same local subnet as the E5810B.
When a client’s IP address is on a different subnet, all packets
must be sent to a subnet gateway.
Refer to “Glossary” for an example of a subnet.
Default Gateway 0.0.0.0 The default gateway is the IP address of the default subnet
gateway that allows the E5810B to communicate with systems
that are not on the local subnet. This is the default subnet gateway
where packets are sent to a device not on the local subnet, as
determined by the subnet mask setting. Only one default subnet
gateway can be configured. A value of 0.0.0.0 indicates that no
subnetting is configured.
Table 3-1 E5810B configuration parameters description (continued)
Parameter Default setting Description