Agilent Technologies E3646A, Руководство пользователя, Страница: 33 / 211

Chapter 2 General Information
Installation
33
2
Installation
Initial Inspection
When you receive your power supply, inspect it for any obvious damage that may
have occurred during shipment. If any damage is found, notify the carrier and the
nearest Agilent Technologies Sales Office immediately. Warranty information is
shown in the front of this manual.
Keep the original packing materials in case the power supply has to be returned to
Agilent Technologies in the future. If you return the power supply for service, attach
a tag identifying the owner and model number. Also include a brief description of the
problem.
Mechanical Check
This check confirms that there are no broken terminals or knob and that the cabinet
and panel surfaces are free of dents and scratches. Verify that the display is not
scratched or cracked.
Electrical Check
Chapter 1 describes quick operation procedure that verifies to a high level of
confidence that the power supply is operating in accordance with its specifications.
More complete verification procedures are included in the
Service Information .
Cooling and Location
Cooling
The power supply can operate at rated specifications within the temperature range of
0 °C to 40 °C, Power supply loading is derated from 40 °C to 55 °C. A fan cools the
power supply by drawing air through the sides and exhausting it out the back. Using
an Agilent rack mount will not impede the flow of air.
Bench Operation
Your power supply must be installed in a location that allows sufficient space at the
sides and rear of the power supply for adequate air circulation. The rubber bumpers
must be removed for rack mounting.
Cleaning
No cleaning is required for this product. If you wish to remove dust from the enclosure,
use a dry cloth.