Agilent Technologies E2050, Руководство по установке и настройке

Страница: 60 / 111

60 Chapter 3
Configuration
Configuration Methods
5 Create the appropriate directory structure and TFTP configuration
file for each LAN/GPIB Gateway, as noted in the
T144
configuration
value you set in the
/etc/bootptab
file. Be sure you set
permissions on these directories and on the TFTP configuration file
to allow access by the
bootpd
daemon.
For example, the
T144
value in the previous example
/etc/
bootptab
file was set to “
E2050/gw1.cfg
”. We will also assume
the default TFTP mode is being used and that the client system is
running HP-UX Version 9. Thus, in this example, you would:
n
cd
to the
/usr/tftpdir
directory.
n
Create an
E2050
subdirectory under
/usr/tftpdir
.
n
cd
to the
E2050
subdirectory
n
Create the TFTP configuration file,
gw1.cfg
, with your editor.
6 Edit the TFTP configuration file, adding the configuration values you
desire to set for the Gateway. (You
only need to specify the non-
default values that you want.) The following information will help you
complete this file correctly.
This table lists the configuration values you can set in the TFTP file.
Also, see the example TFTP file that follows this table..
Configuration Value Telnet Command Default Value
Hostname
hostname: E2050
LAN Timeout
lan-timeout: 0
I/O Timeout
io-timeout: 120
IP Allow List
allow: * (All allowed)
GPIB Address
hpib-address: 21
GPIB Interface Name
hpib-name: hpib
GPIB Logical Unit
hpib-unit: 7