Agilent Technologies E2050, Руководство по установке и настройке

Страница: 17 / 111

Chapter 1 17
Introduction
E2050 Hardware Description
AC/DC Adapter and AC Power Cord
As shown in the following figure, the power module (AC/DC Adapter)
(Agilent part number 0950-2546) provides 5 Vdc power to the Gateway. The
4-foot, DC cable attached to the power module connects to the power input
on the back panel of the Gateway. The universal AC outlets on the power
module can automatically accept and adapt to 100-240 Vac power.
The separate AC power cord connects to the AC IN outlet on the power
module and to a power outlet (wall outlet), thus providing power to the power
module and Gateway. You should have received the appropriate AC power
cord for your country.
Rack Mount Kit (Optional)
As shown in the following figure, this optionally purchased E2051 Rack
Mount Kit allows you to mount up to two LAN/GPIB Gateways in a rack
frame. A light-duty, fixed shelf is also required. It is recommended you use
an Agilent E3666 Plain Shelf with this rack mount kit.
AC/DC Adapter and Standard AC Power Cord
Rack Mount Kit (Optional)