Agilent Technologies DSO9024H, Руководство пользователя, Страница: 71 / 102

Using the Oscilloscope
71
To adjust the vertical offset
• Click and hold the left mouse button or touch screen stylus on the waveform
you want to move, then drag the pointer up or down to move the waveform to
the desired offset. Release when finished.
or
• Click and hold the left mouse button or touch screen stylus on the ground
reference indicator for the waveform you want to move, then drag the pointer
to move the waveform to the desired offset. Release when finished.
or
• Click the channel button in the vertical toolbar, then set the vertical offset using
the spin box control in the Channel Setup dialog box.
If you leave the mouse pointer on the waveform (without clicking), the pointer
changes into crossed arrows as a visual indicator that you can drag the
waveform when you click and hold. If you move the crossed arrow pointer up
or down, the interface constrains the movement vertically and adjusts vertical
offset only. If you initially move the crossed arrow pointer left or right, the
interface constrains the movement horizontally and changes the horizontal
position setting only.
You can also adjust the vertical offset through the Channel Setup dialog box.
See “To access the channel setup”.