Agilent Technologies DSO9024H, Руководство пользователя, Страница: 62 / 102

Using the Oscilloscope
62
To select a command from the menu bar
1 Click a menu bar item.
2 Move the pointer to the desired menu item.
3 Click the mouse button or touch screen.
The desired command is executed, or a dialog box is presented for you to
configure the oscilloscope.
If you continue to hold the mouse button after step 1, release the button in
step 3 to execute the command.
Some menus have submenus. These are indicated by an arrow at the right side
of the command. When you move the pointer to one of these menu commands,
the submenu automatically appears. You can then move the pointer to the
desired command on that submenu and click the mouse button or touch screen
to execute the command.
Figure 3-8
Selecting a Command from the Menu Bar
Click the Measure
menu, then Thresholds
to customize the
measurement setup