background image

Safety Practices and Hazards 

Agilent Cary 600 Series FTIR Spectrometers and Microscopes User’s Guide 

19 

Operation is subject to the following two conditions: 

1

 

This device may not cause harmful interference. 

2

 

This device must accept any interference received, including 
interference that may cause undesired operation. 

If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the 
equipment off and on, the user is encouraged to try one or more of 
the following measures: 

1

 

Relocate the radio or antenna. 

2

 

Move the device away from the radio or television. 

3

 

Plug the device into a different electrical outlet, so that the device 
and the radio or television are on separate electrical circuits. 

4

 

Make sure that all peripheral devices are also certified. 

5

 

Make sure that appropriate cables are used to connect the device 
to peripheral equipment. 

6

 

Consult your equipment dealer, Agilent Technologies, or an 
experienced technician for assistance. 

7

 

Changes or modifications not expressly approved by Agilent 
Technologies could void the user’s authority to operate the 
equipment. 

ICES/NMB-001 

This ISM device complies with Canadian ICES- 001. 

Cet appareil ISM est conforme à la norme NMB-001 du Canada. 

 

 

Содержание Cary 600 Series



















































Отзывы: