1 Safety guidelines
Potential safety hazards
12
BenchCel Microplate Handler User Guide
Static electricity
CAUTION
The rack-release button at the top of the stacker head on the BenchCel device is
sensitive to static electricity. Static electricity can cause a potential loss of motor
control and loss of communication with the BenchCel device. Ensure that you
discharge any potential static electricity before touching the rack-release button. To
discharge static electricity, you can touch the white painted or metal surface of the
BenchCel device before touching the rack-release button.
Improper access or use
CAUTION
Improper use by an untrained user could damage the BenchCel Microplate Handler.
For example, the robot gripper could collide with a stacker if a teachpoint is not
defined properly.
Ensure that only fully trained BenchCel administrators have access to the user account
passwords.
Lifting hazard
WARNING
The BenchCel device without labware racks weighs 28 – 51 kg (61.7 – 112.4 lb),
depending on the configuration. Attempting to lift or move the BenchCel device
without assistance could cause personal injury. Request assistance and use proper
lifting techniques when lifting or moving the device.
CAUTION
If the BenchCel Microplate Handler is incorrectly packaged and moved by someone
other than an Agilent employee, the device may be damaged. Such damage is not
covered by the warranty.
Before moving a BenchCel Microplate Handler, ensure the new location meets the
laboratory requirements.
Related information
For more information about…
See…
General safety
“General safety information” on page 2
Stopping in an emergency
Shields, pendants, and safety
interlock circuit
“Safety equipment and features” on page 8
Locations of hardware components
“Hardware overview” on page 15
Site laboratory requirements
“Verifying laboratory requirements” on
page 37
Reporting problems with the
BenchCel Microplate Handler
