Agilent Technologies BenchBot, Инструкция по безопасности и установке

Страница: 14 / 72

1 Safety guidelines
Safety and regulatory compliance
4 BenchBot Robot Safety and Installation Guide
Safety and regulatory compliance
The BenchBot Robot complies with the applicable EU Directives. See the
Declaration of Conformity or Declaration of Incorporation, as applicable, for
details. The BenchBot Robot is designed to comply with the standards listed in
the following table.
Electromagnetic compatibility
If the BenchBot Robot causes interference with radio or television reception,
which can be determined by turning the device off and on, try one or more of
the following measures:
•
Relocate the radio or television antenna.
•
Move the device away from the radio or television.
•
Plug the device into a different electrical outlet, so that the device and the
radio or television are on separate electrical circuits.
•
Make sure that all peripheral devices are also certified.
•
Make sure that appropriate cables are used to connect the device to
peripheral equipment.
•
Consult your equipment dealer, Agilent Technologies, or an experienced
technician for assistance.
Changes or modifications not expressly approved by Agilent Technologies could
void the user's authority to operate the equipment.
Sound emission declaration
Sound pressure: Lp < 70 dB according to EN 27779:1991.
Schalldruckpegel: LP < 70 dB nach EN 27779:1991.
Regulatory Compliance Standard
EMC
European Union EMC Directive 2004/108/EC
IEC 61326- 1:2005 / EN 61326- 1:2006
Canada ICES/NMB- 001:2004
Australia/New Zealand AS/NZS CISPR 11:2004
Safety
European Union Machinery Directive 2006/42/EC
Low Voltage Directive 2006/95/EC
IEC 61010- 1:2001 / EN61010- 1:2001
Canada CAN/CSA- C22.2 No. 61010- 1- 04
USA ANSI/UL 61010- 1:2004