Agilent Technologies AIC 5000, Руководство по установке

Страница: 18 / 64

12
AIC 5000 Installation and Configuration
User to the AIC Local Administrators Group” (remember that
the password will need to be changed here if the user's
password is changed on the network.) The name must be
entered as
DomainName \ UserName where DomainName is
the domain and Username is the user name.
Notes
The Autologon user should not have an
expiring password, as this will cause
problems with automatic login. To set up an
AIC workgroup user for a non-expiring
password (the default expiring date is 46
days), from the command prompt type:
net accounts /MAXPWAGE:Unlimited
Once you have enabled Auto Logon, you
can go back to the Login screen by holding
down the SHIFT key while powering up.
4. After the entries have been made, click Set .
Note
For additional information about the
purpose and options of the
DCOMServerSettings program, please refer
to the data system installation guide.
5. Restart the AIC. After restarting, it should automatically log
directly into the Windows desktop.
6. To avoid memory leaks, from the Windows desktop you should
change the Theme to Windows Classic. To do this, right-click
the desktop and select
Properties . Click the Themes tab, select
Windows Classic , and click OK .
Step 7. Add one or more network printers
In order for the AIC to print analysis reports, it must have one or
more printers configured. For each printer to be configured,
perform the following steps: