Agilent Technologies AIC 5000, Руководство по установке

Страница: 16 / 64

10
AIC 5000 Installation and Configuration
steps again. Contact Agilent support if the validation continues to
fail.
10. Reboot the AIC to allow the installation to complete.
Step 3. Set up the IP address on the AIC
Like all network devices, the AIC needs an IP address to identify
itself on the network. The AIC is shipped already configured for
DHCP. If using DHCP, you may proceed to the next section.
Contact your network administrator if you aren‟t sure.
If you are using a static IP address instead of DHCP, do the
following:
1. From the Windows Start menu, select Start followed by
Control Panel . Click Network Connections .
2. Right-click Local Area Connection .
3. Click Properties .
4. In the This connection uses the following items section, click
Internet Protocol (TCP/IP) , and then click Properties .
5. Fill in the values provided by your network administrator.
Step 4. Add the AIC to the domain
In order to communicate with computers, printers, and users from
the domain, the AIC must be a member of the domain.
1. From the Start menu, select Control Panel and then select
System and then Computer Name .
2. Click Change .
3. In the Computer name box, type a unique name for the AIC.
4. Click Domain , and in the box, type a domain for the AIC.