Agilent Technologies 969-8935 Скачать руководство пользователя страница 25

Страница: 25 / 103

Instructions for Use

Storage

198/276

TV 551/701 SEM Navigator User Manual / 87-900-958-01(G

)

This manual uses the following conventions

WARNING!

Warning messages are for attracting the attention of the operator to a
particular procedure or practice which, if not followed correctly, could lead
to serious injury.

CAUTION!

The caution messages are displayed before procedures which, if not followed,
could cause damage to the equipment

NOTE

Notes

contain important information taken from the text.

Storage

In order to guarantee the maximum level of performance and
reliability of Agilent Turbomolecular pumps, the following guidelines
must be followed:

when shipping, moving and storing pumps, the following

environmental specifications should not be exceeded:

temperature range: -20 °C to 70 °C

relative humidity range: 0 to 95 % (non condensing)

the turbomolecular pumps must be always soft-started when

received and operated for the first time by the customer

the shelf life of a turbomolecular pump is 10 months from the

shipping date.

Содержание 969-8935








































































































Результаты поиска

Содержание 969-8935

Отзывы:

Бренды по названию

Популярные бренды

Agilent Technologies 969-8935, Руководство пользователя

Результаты поиска

Содержание 969-8935

Отзывы:

Бренды по названию

Популярные бренды