manualshive.com logo in svg

Agilent Technologies 8960, Справочное руководство

Поделиться
Скачать
Agilent Technologies 8960 Скачать руководство пользователя страница 725

725

S:\Hp8960\E1962B CDMA 2000\Pi Release\Reference Guide\Chapters\cdma2000_ts_err_msg_mui.fm

Manual User Error Messages

Manual User Error Messages

Description

These messages are intended to be displayed on the manual user interface only, and are not entered into the 
Error/Event Queue.

Error Message

Description

The function you requested is not yet available.

The test set does not have this capability.

IQ Calibration completed successfully for modulator <N> 

<N> is the IQ modulator number that you are 
attempting to calibrate, <N> is 1 or 2.

IQ Calibration failed for modulator <N> 

<N> is the IQ modulator number that you are 
attempting to calibrate, <N> is 1 or 2.

The function you requested is not available in this TA.

This function is used in another Test Application.

IQ Calibration for modulator 1 in progress (10 minutes). Call 
processing disabled.

This error is cleared by either the; IQ Calibration 
completed successfully for modulator <N>, or IQ 
Calibration failed for modulator <N>.

IQ Calibration for modulator 2 in progress (6 minutes). Call 
processing disabled.

This error is cleared by either the; IQ Calibration 
completed successfully for modulator <N>, or IQ 
Calibration failed for modulator <N>.

Instrument warning: Audio generator instrument has been 
closed.

The audio generator instrument was closed 
automatically by the test set.

Measurement warning: Audio Analyzer instrument has been 
closed.

The audio analyzer instrument was closed 
automatically by the test set.

Measurement warning: Analog audio measurement has been 
closed.

Analog audio measurements have been closed by 
the test set.

Protocol warning: Setting change has terminated the link 
with the DUT

Some setting change has caused the call to 
disconnect.

Warning; Call processing disabled

The call processing functions are not active 
because the test set is performing calibration 
operations.

IQ first modulator calibration X%

IQ modulator calibration in progress, X represents 
the percent complete.

IQ second modulator calibration X%

IQ modulator calibration in progress, X represents 
the percent complete.

Содержание 8960



















































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды