manualshive.com logo in svg

Agilent Technologies 8960 Series 10, Справочное руководство

Поделиться
Скачать
Agilent Technologies 8960 Series 10 Скачать руководство пользователя страница 537

537

S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\gen_inst_status.fm

Instrument Status Area

Instrument Status Area

Description

The Instrument status area is found on the bottom center of the test set’s display.

Figure 1.

Status Area of the Test Set Display

Background

Users are able to initiate more than one measurement at a time with the test set. The test set’s display will 
show a maximum of 2 measurements. When 3 or more measurements are initiated, or the MEASUREMENT 
screen is not displayed, the Background annunciator reminds the user that measurements are active but not 
displayed.

<Operating Mode> Status

The call processing status and the operating modes are displayed in this area. This area may change 
(depending on the TA that is active) in order to provide TA specific information.

Shift 

This annunciator indicates that the blue SHIFT key has been pressed, and that the next key you press will 
perform the shifted function indicated, also in blue.

Ext Ref

When a suitable external time base is connected to the rear panel 10MHz REF IN connector, this annunciator 
will turn on.

Offset

Indicates that the Amplitude Offset state is set to On.

R L T S

This annunciator indicates the state of four different conditions of the test set:

• Remote annunciator. ‘R’ turns on when the test set is operated remotely.

• Listen annunciator. ‘L’ turns on when the test set is listening to a command.

• Talk annunciator. ‘T’ turns on when the test set is providing information over GPIB.

• SRQ annunciator. ‘S’ turns on when an SRQ is active.

Содержание 8960 Series 10







































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды