manualshive.com logo in svg

Agilent Technologies 8960 Series 10, Справочное руководство

Поделиться
Скачать
Agilent Technologies 8960 Series 10 Скачать руководство пользователя страница 188

188

 S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\prog_prog_guide_step6b.fm

Step 6b: Determine if a Measurement Is Done

Step 6b: Determine if a Measurement Is Done

July 12, 1999

Background

After a set of concurrent measurements have been started, it is desirable that the control program be able to 
determine when individual measurement results are available so that the control program can request that 
measurement’s results without having to wait on other measurements which have not yet completed.

Overview

The INITiate:DONE? query command is used to determine which measurement is finished.

As the name implies, the query returns the name of whichever active measurement is done so that the control 
program can request that measurement’s results.

This command is query only and returns only one response per query. The responses returned and their 
meaning are shown in the following table.

Once a measurement is reported as being done via the INITiate:DONE? query it is removed from the done list 
(measurements are only reported as being done once). The design of the INITiate:DONE? query is predicated 
on the control program immediately fetching a measurement’s results once it is reported as being done.

Responses Returned from INITiate:DONE? Query

Response

Meaning

TXP

The transmit power measurement is done.

PVT

The power versus time measurement is done.

PFER

The phase and frequency error measurement is done.

ORFS

The output RF spectrum measurement is done.

AAUD

The analog audio measurement is done.

DAUD

The decoded audio measurement is done.

BERR

The bit error measurement is done.

FBER

The fast bit error measurement is done.

DPOW

The dynamic power measurement is done.

IQT

The I/Q Tuning measurement is done.

WAIT

There are one or more measurements that are in 
progress, but none of those measurements are done yet.

NONE

No measurements are in progress.

Содержание 8960 Series 10







































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды