manualshive.com logo in svg

Agilent Technologies 8960 Series 10, Справочное руководство

Поделиться
Скачать
Agilent Technologies 8960 Series 10 Скачать руководство пользователя страница 157

157

S:\Hp8960\E1960A GSM Mobile Test Application\A.04 Release\Reference_Manual\Chapters\prog_prog_guide_step1.fm

Step 1: Set the Test Set’s Operating Mode to Active Cell

Step 1: Set the Test Set’s Operating Mode to Active Cell

Background

The test set contains a GSM base station emulator (BSE). The BSE’s primary purpose is to provide the GSM 
call processing necessary for parametric measurements on the RF and audio signals of a GSM mobile station 
(MS).

An important characteristic of the test set’s BSE is its operating mode. The operating mode sets the way in 
which the BSE interacts with the mobile station. The BSE has two operating modes; active cell mode and test 
mode.

Active cell mode is used when emulating a normal GSM cell. Test mode is used when it is not possible, or not 
desired, to communicate with the MS via over-the-air signaling, but downlink stimulus and uplink 
measurements are still needed.

This Programming Guide focuses on programming the test set’s BSE in active cell operating mode.

Overview of Active Cell Operating Mode

Active cell is the default operating mode of the test set’s BSE and is used when emulating a normal GSM cell 
(that is, active signaling between the MS and the BSE). 

Active Cell Features

The basic features provided by the BSE when the operating mode is set to active cell are:

• Generation of a BCH (broadcast channel) without TCH (traffic channel).

• Support for location updating.

• Call setup, both MS and BSE originated.

• Changing TCH parameters during a call using over-the-air signaling.

• BSE initiated and MS initiated call disconnection.

• All measurements supported in the test application are available.

• The BSE automatically controls the test set’s demodulation receiver.

Содержание 8960 Series 10







































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды