Agilent Technologies 86100A Скачать руководство пользователя страница 337 | Manualshive

Страница: 337 / 366

Agilent Technologies 86100A Скачать руководство пользователя страница 337

24-5

Trigger Commands

PLOCk

PLOCk

Command

TRIGger:PLOCk {{ON | 1} | {OFF | 0}}

This command enables or disables pattern lock. When pattern lock is turned on, the 86100C
internally generates a trigger synchronous with the user's pattern. Pattern lock is only avail-
able on an 86100C mainframe with Option 001 installed.

Restrictions

Software revision A.04.00 and above (86100C instruments).

Query

TRIGger:PLOCk?

Returned Format

[:TRIGger:PLOCk] {1 | 0}<NL>

Example

10 OUTPUT 707; ":TRIGger:PLOCk ON"

PLOCk:AUTodetect

Command

:TRIGger:PLOCk:AUTodetect

This command executes autodetecting of pattern lock parameters.

Restrictions

Software revision A.04.00 and above (86100C instruments)

Query

:TRIGger:PLOCk:AUTodetect?

Returns a string explaining the results of the last autodetect. The string is empty if the last
autodetect completed successfully. The returned string stays the same until the next autode-
tect is executed.

Returned Format

The following are examples of strings returned by this query. (The blank spaces are filled in
with the appropriate numeric values.)

Detected trigger rate ___ is less than the minimum trigger rate of ___

Unable to determine the pattern length

Unable to determine the bit rate and trigger divide ratio

User supplied data rate ___ is not a multiple of detected trigger rate ___

Example

10 OUTPUT 707; ":TRIGger:PLOCk:AUTodetect"

RBIT

Command

:TRIGger:RBIT <relative_bit>

This command sets the relative bit number used by pattern lock trigger mode.

<relative_bit>

<relative_bit> is an integer with a minimum value of 0 and a maximum value equal to the cur-
rent pattern length setting minus one.

Restrictions

Software revision A.04.00 and above (86100C instruments)

Query

:TRIGger:RBIT?

This query returns the current setting of relative bit.

Returned Format

[:TRIGger:RBIT] <relative_bit><NL>

Example

10 OUTPUT 707; ":TRIGger:RBIT 1023"

«
...
335
336
337
338
339
...
»

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов