manualshive.com logo in svg

Agilent Technologies 86100A, Руководство программиста, Страница: 334 / 366

Поделиться
Скачать
Agilent Technologies 86100A Скачать руководство пользователя страница 334

24-2

Trigger Commands

ATTenuation

Trigger Commands

The scope trigger circuitry helps you locate the waveform you want to view. Edge triggering 
identifies a trigger condition by looking for the slope (rising or falling) and voltage level (trig-
ger level) on the source you select. Any input channel, auxiliary input trigger (4-channel 
scopes only), line, or external trigger (2-channel scopes only) inputs can be used as the trig-
ger source. The commands in the TRIGger subsystem define the conditions for triggering. 
The command set has been defined to closely represent the front-panel trigger dialogs.

ATTenuation

Command

:TRIGger:ATTenuation <attenuation factor>[,{RATio | DECibel}]

This command controls the attenuation factor and units. The default attenuation factor value 
is 1:1. The default attenuation units is ratio.

Query

:TRIGger:ATTenuation

?

The query returns the current attenuation factor and units.

Returned Format

[:TRIGger:ATTenuation] <attenuation factor>[,{RATio | DECibel}]<NL>

BRATe

Command

:TRIGger:BRATe <bit_rate>

This command sets the bit rate when the trigger is in pattern lock mode.

Restrictions

Software revision A.04.00 and above (86100C instruments)

Query

:TRIGger:BRATe?

This query returns the current setting of the bit rate.

Returned Format

[:TRIGger:BRATe] <bit_rate><NL>

Example

10 OUTPUT 707; "

:

TRIGger:BRATe 1E9"

BRATe:AUTodetect

Command

:TRIGger:BRATe:AUTodetect {{ON | 1} | {OFF | 0}}

This command enables or disables automatic detection of the bit rate. When disabled, use the 

:TRIGger:BRATe

 command to set the bit rate. When enabled, use the 

:TRIGger:PLOCk:AUTodetect

 

command to initiate automatic detection.

Restrictions

Software revision A.04.00 and above (86100C instruments)

Query

:TRIGger:BRATe:AUTodetect?

Returned Format

[

:TRIGger:BRATe:AUTodetect] {1 | 0}<NL>

Example

10 OUTPUT 707; ":TRIGger:BRATe:AUTodetect ON"

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов