manualshive.com logo in svg

Agilent Technologies 86100A, Руководство программиста, Страница: 290 / 366

Поделиться
Скачать
Agilent Technologies 86100A Скачать руководство пользователя страница 290

18-48

Measure Commands

VPP

Measures the absolute minimum voltage present on the selected source waveform. The 
source is specified with the MEASure:SOURce command or with the optional parameter fol-
lowing the VMIN command. <source> is {CHANnel<N> | FUNCtion<N> | RESPonse<N> | 
WMEMory<N>} where <N>, for channels is dependent on the type of plug-in and its location 
in the instrument. For functions: 1 or 2. For waveform memories (WMEMORY): 1, 2, 3, or 4. 
For TDR responses: 1, 2, 3, or 4.

Mode

Oscilloscope and TDR modes.

Query

:MEASure:VMIN? [<source>]

The query returns the measured absolute minimum voltage present on the selected source 
waveform.

Returned Format

[:MEASure:VMIN] <value>[,<result_state>]<NL>

<value> is the absolute minimum voltage present on the waveform. If SENDvalid is ON, the 
<result_state> is returned with the measurement result. Refer to 

Table 18-4 on page 18-39

 

for a list of the result states.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MEASURE:VMIN?” 

VPP

Command

:MEASure:VPP [<source>]

Measures the maximum and minimum voltages on the selected source, then calculates the 
peak-to-peak voltage as the difference between the two voltages. Sources are specified with 
the MEASure:SOURce command or with the optional parameter following the VPP command. 
<source> is {CHANnel<N> | FUNCtion<N> | RESPonse<N> | WMEMory<N>} where <N>, is 
an integer, from 1 through 4.

Mode

Oscilloscope and TDR modes only

Query

:MEASure:VPP? [<source>]

The query returns the specified source peak-to-peak voltage.

Returned Format

[:MEASure:VPP] <value>[,<result_state>]<NL>

<value> is the peak-to-peak voltage of the selected source. If SENDvalid is ON, the 
<result_state> is returned with the measurement result. Refer to 

Table 18-4 on page 18-39

 

for a list of the result states.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;":MEASURE:VPP?"

VRMS

Command

:MEASure:VRMS {CYCLe | DISPlay}, {AC | DC} [,<source>]

Measures the RMS voltage of the selected waveform by subtracting the average value of the 
waveform from each data point on the display. Sources are specified with the MEA-
Sure:SOURce command or with the optional parameter following the VRMS command.

The CYCLe parameter instructs the RMS measurement to measure the RMS voltage across 
the first period of the display. The DISPLay parameter instructs the RMS measurement to 
measure all the data on the display. Generally, RMS voltage is measured across one waveform 

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов