manualshive.com logo in svg

Agilent Technologies 86100A, Руководство программиста, Страница: 232 / 366

Поделиться
Скачать
Agilent Technologies 86100A Скачать руководство пользователя страница 232

17-4

Mask Test Commands

COUNt:FAILures?

COUNt:FAILures?

Query

:MTESt:COUNt:FAILures? {{POLYgon | REGion}{1:8}} [,{TOTal | MARGin | MASK}]

Returns the number of failures that occurred within a particular region. By defining regions 
within regions, then counting the failures for each individual region, you can implement test-
ing at different tolerance levels for a given waveform. The value 9.999E37 is returned if mask 
testing is not enabled or if you specify a region number that is not used. The integer, 1 
through 8, designates the region for which you want to determine the failure count. The 

TOTal

, 

MARGin

, and 

MASK

 (default) arguments specifies which portion of the region to return fail-

ures (hits) for. 

TOTal

 returns the total number of failed data points. For positive margins, this 

is the sum of the 

MASK

 and 

MARGin

 counts. For negative margins, this is the same as the 

MASK

 

count. 

MARGin

 returns the number of data points that occurred 

between

 the margin mask and 

the standard mask. This is the margin area. This definition is true for both positive and nega-
tive margins. If the query argument is ommited, the default argument used is 

MASK

.

Restrictions

Software revision A.07.00 and above for 

POLYgon

, 

TOTal

, 

MARGin

, and 

MASK

 arguments.

Returned Format

[:MTESt:COUNt:FAILures] <number_of_failures><NL>

<number_of_failures> is the number of failures that have occurred for the designated region.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MTEST:COUNT:FAILURES? REGION3”

COUNt:FSAMples?

Query

:MTESt:COUNt:FSAMples?

Returns the total number of failed samples in the current mask test run. This count is for all 
regions and all waveforms, so if you wish to determine failures by region number, use the 
COUNt:FAILures? query. The count value returned is not the sum of the failure counts for 
each region. For example, assume a region 2 enclosed completely by region 1. If region 1 has 
100 failures, the value returned is 100, regardless of how many failures are in region 2. 
Because region 2 is completely enclosed, the failure count for region 2 must be less than or 
equal to 100 in this instance.

The value 9.999E37 is returned if mask testing is not enabled.

Returned Format

[:MTESt:COUNt:FSAMples] <number_of_failed_samples><NL>

<number_of_failed _samples> is the total number of failed samples for the current test run.

Example

10 OUTPUT 707;”:SYSTEM:HEADER OFF”
20 OUTPUT 707;”:MTEST:COUNT:FSAMPLES?”

COUNt:HITS?

Query

:MTESt:COUNt:HITS? {TOTal | MARGin | MASK}

Returns the number of failed data points (or hits) that occurred when using margin mask 
testing. TOTal returns the total number of failed data points. For positive margins, this is the 
sum of the MASK and MARGin counts. For negative margins, this is the same as the MASK 
count. MARGin returns the number of data points that occurred 

between

 the margin mask 

and the standard mask. This is the margin area. This definition is true for both positive and 

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов