Agilent Technologies 86100A Скачать руководство пользователя страница 196 | Manualshive

Страница: 196 / 366

Agilent Technologies 86100A Скачать руководство пользователя страница 196

12-4

Function Commands

HORizontal

The <operator> is any active math operation for the selected function. The <operand> is any
allowable source for the selected FUNCtion, including channels, waveform memories, or
functions. If the function is applied to a constant, the source returns the constant.

Example

10 OUTPUT 707;":FUNCTION1?"

If the headers are off (see :SYSTem:HEADers), the query returns only the operands, not the
operator.

10 :SYST:HEADER ON
20 :FUNC1:SUBTRACT CHAN1,CHAN2
30 :FUNC1? !returns :FUNC1:SUBTRACT CHAN1,CHAN2
40 :SYST:HEADER OFF
50 :FUNC1? !returns CHAN1,CHAN2

HORizontal

Command

:FUNCtion<N>:HORizontal {AUTO | MANual}

Sets the horizontal tracking to either AUTO or MANual. The HORizontal command also
includes a subsystem consisting of the commands POSition and RANGe.

Restrictions

This command applies only to the Magnify and Versus operators. On software revisions
A.06.00 and above, using this function on operators other than Magnify or Versus returns the
error message “–224, Illegal parameter value”. On software revisions below A.06.00, the error
message is not returned.

Query

:FUNCtion<N>:HORizontal?

The query returns the current horizontal scaling mode of the specified function.

Returned Format

[:FUNCtion<N>:HORizontal] {AUTO | MANual}<NL>

Example

10 OUTPUT 707;":FUNCTION1:HORIZONTAL?"

HORizontal:POSition

Command

:FUNCtion<N>:HORizontal:POSition <position_value>

This command sets the time value at center screen for the selected function. The
<position_value> argument is the position value in time, in seconds.

Restrictions

This command applies only to the Magnify and Versus operators. If this function is used on
operators other than Magnify or Versus, no error message is returned regardless of software
revision.

Query

:FUNCtion<N>:HORizontal:POSition?

The query returns the current time value at center screen of the selected function.

Returned Format

[:FUNCtion<N>:HORizontal:POSition] <position><NL>

Example

This example places the current horizontal position setting for function 2 in the numeric vari-
able, Value.

10 OUTPUT 707;":SYSTEM:HEADER OFF"

!Response headers off

20 OUTPUT 707;":FUNCTION2:DISPLAY ON"
30 OUTPUT 707;":FUNCTION2:HORIZONTAL:POSITION?"

«
...
194
195
196
197
198
...
»

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов