manualshive.com logo in svg

Agilent Technologies 86100A, Руководство программиста, Страница: 113 / 366

Поделиться
Скачать
Agilent Technologies 86100A Скачать руководство пользователя страница 113

4-5

Root Level Commands

BLANk

Unable to set horizontal scale/delay for channel n

Returned Format

[:AUToscale] <data rate>

BLANk

Command

:BLANk {CHANnel<N> | FUNCtion<N> | WMEMory<N> | JDMemory | RESPonse<N> | HISTogram | CGMemory}

This command turns off an active channel, function, waveform memory, jitter data memory, 
TDR response, histogram, or color grade memory. The VIEW command turns them on. <N> is 
an integer, 1 through 4.

Restrictions

Software revision A.04.00 and above (86100C instruments) for jitter data memory argument.

Example

10 OUTPUT 707;":BLANK CHANNEL1"

CDISplay

Command

:CDISplay [CHANnel<N>]

This command clears the display and resets all associated measurements. If the analyzer is 
stopped, all currently displayed data is erased. If the analyzer is running, all of the data in 
active channels and functions is erased; however, new data is displayed on the next acquisi-
tion. Waveform memories are not erased. If a channel is specified as a parameter, only the dis-
played data from that channel is cleared. <N> is an integer, 1 through 4.

Restrictions

In TDR mode (software revision A.06.00 and above), the optional channel argument is not 
allowed.

Example

10 OUTPUT 707;":CDISPLAY"

COMMents

Command

:COMMents {LMODule | RMODule},"<comments_text>"

This command sets the comments field for the module. This field is used to describe options 
included in the module, or for user comments about the module. A maximum of 35 characters 
is allowed. <comments_text> represents the ASCII string enclosed in quotation marks. The 
maximum length of the string is 35 characters.

Example

10 OUTPUT 707;”:COMMENTS LMODULE”

Query

:COMMents? {LMODule | RMODule}

The query returns a string with the comments field associated with the module.

Returned Format

[:COMMents] <string>

CREE 

Command

:CREE <mask>

This command sets a mask into the Clock Recovery Event Enable Register. A “1” in a bit posi-
tion enables the corresponding bit in the Clock Recovery Event Register to set bit 7 in the 
Operation Status Register. <mask> is the decimal weight of the enabled bits. 

Table 4-2 on 

page 4-6

 shows the enabled bits for some useful example mask values. Bits that are not 

marked as enabled for a mask are blocked from affecting the operation status register.

Query

:CREE?

Содержание 86100A















































































































































































































































































































































































Отзывы:

Нет отзывов