Agilent Technologies 86038B, Руководство пользователя

Страница: 315 / 350

Agilent 86038B Photonic Dispersion and Loss Analyzer, Second Edition
315
Preferred Procedure
Use the following procedure on most occasions.
1 Clean the interface, when no lens is connected, by pushing
and pulling a new, dry pipe cleaner into the opening. Rotate
the pipe cleaner slowly as you do this.
2 Blow away any remaining lint with compressed air.
Procedure for Stubborn Dirt
Use this procedure when there is greasy dirt on the interface:
1 Moisten a new pipe cleaner with isopropyl alcohol.
2 Clean the interface by pushing and pulling the pipe cleaner
into the opening. Rotate the pipe cleaner slowly as you do
this.
3 Using a new, dry pipe cleaner, and a new, dry cotton swab
remove the alcohol, any dissolved sediment and dust.
4 Blow away any remaining lint with compressed air.
How to clean bare fiber adapters
Bare fiber adapters are difficult to clean. Protect from dust
unless they are in use.
C A U T I O N
Never use any kind of solvent when cleaning a bare fiber
adapter as solvents can:
• Damage the foam inside some adapters.
• Deposit dissolved dirt in the groove, which can then dirty the
surface of an inserted fiber.
Preferred Procedure
Use the following procedure on most occasions.
1 Blow away any dust or dirt with compressed air.
Procedure for Stubborn Dirt
Use this procedure when there is greasy dirt on the adapter:
1 Clean the adapter by pushing and pulling a new, dry pipe
cleaner into the opening. Rotate the pipe cleaner slowly as
you do this.
C A U T I O N
Be careful when using pipe cleaners, as the core and the
bristles of the pipe cleaner are hard and can damage the
adapter.