Agilent Technologies 83437A Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 106

Agilent Technologies 83437A Скачать руководство пользователя страница 6

vi

General Safety Considerations

General Safety Considerations

This product has been designed and tested in accordance with IEC Publica-
tion 61010-1, Safety Requirements for Electrical Equipment for Measurement,
Control and Laboratory Use, and has been supplied in a safe condition. The
instruction documentation contains information and warnings that must be
followed by the user to ensure safe operation and to maintain the product in a
safe condition.

W A R N I N G

If this instrument is not used as specified, the protection provided by
the equipment could be impaired. This instrument must be used in a
normal condition (in which all means for protection are intact) only.

W A R N I N G

To prevent electrical shock, disconnect the Agilent 83438A from
mains before cleaning. Use a dry cloth or one slightly dampened with
water to clean the external case parts. Do not attempt to clean
internally.

W A R N I N G

This is a Safety Class 1 product (provided with a protective earthing
ground incorporated in the power cord). The mains plug shall only be
inserted in a socket outlet provided with a protective earth contact.
Any interruption of the protective conductor inside or outside of the
product is likely to make the product dangerous. Intentional
interruption is prohibited.

W A R N I N G

No operator serviceable parts inside. Refer servicing to qualified
personnel. To prevent electrical shock, do not remove covers.

W A R N I N G

For continued protection against fire hazard, replace line fuse only
with same type and ratings, (type T 0.315A/250V for 100/120V
operation and 0.16A/250V for 220/240V operation). The use of other
fuses or materials is prohibited. Verify that the value of the line-
voltage fuse is correct.

• For 100/120V operation, use an IEC 127 5

×

20 mm, 0.315 A, 250 V, Agilent

part number 2110-0449.

• For 220/240V operation, use an IEC 127 5

×

20 mm, 0.16 A, 250 V, Agilent

Technologies part number 2110-0448.

«
...
4
5
6
7
8
...
»

Содержание 83437A











































































































Отзывы:

Нет отзывов