Agilent Technologies 83400 Series, Руководство пользователя, Страница: 5 / 82

iv
Laser Classification
Laser Classification
The Agilent 83402C is classified as an FDA Laser Class IIIb (IEC Laser
Class 3B). The total power of light energy radiated out of the
OPTICAL OUTPUT
connector is no greater than 5 mW at a wavelength of 1300 nm. The following
figure shows the IEC and FDA labels (and their placement) on the
Agilent 83402C.
The Agilent 83403C is classified as an FDA LASER Class I (IEC LASER Class
1). The total power of light energy radiated out of the
OPTICAL OUTPUT
connec-
tor is no greater than 5 mW at a wavelength of 1550 nm.
No adjustments or maintenance are required to keep these products compli-
ant with their classification. The IEC labels shown in the figure could not be
affixed at the factory. Instructions on page 1-5 explain how they are to be
attached.
W A R N I N G Do NOT, under any circumstances, look into the optical output or any
fiber/device attached to the output while the laser is in operation.
W A R N I N G Do not enable the laser when no fiber or equivalent device is attached
to the
OPTICAL OUTPUT connector.
These products cannot be serviced. If service is required, return the instru-
ment to Agilent Technologies.