Agilent Technologies 81650A Скачать руководство пользователя страница 87

Страница: 87 / 92

Other Cleaning Hints

Cleaning Instructions

Agilent 81650A/1A/2A/4A/5A/6A/7A User’s Guide, Third Edition

Other Cleaning Hints

Selecting the correct cleaning method is an important element in

maintaining your equipment and saving you time and money. This

Appendix highlights the main cleaning methods, but cannot address

every individual circumstance.

This section contain some additional hints which we hope will help

you further. For further information, please contact your local Agilent

Technologies representative.

Making the connection

Before you make any connection you must ensure that all lightwave

cables and connectors are clean. If not, then use appropriate the

cleaning methods.

When you insert the ferrule of a patchcord into a connector or an

adapter, ensure that the fiber end does not touch the outside of the

mating connector or adapter. Otherwise, the fiber end will rub up

against something which could scratch it and leave deposits.

Lens cleaning papers

Note that some special lens cleaning papers are not suitable for

cleaning optical devices like connectors, interfaces, lenses, mirrors

and so on. To be absolutely certain that a cleaning paper is applicable,

please ask the salesperson or the manufacturer.

Immersion oil and other index

matching compounds

Do not use immersion oil or other index matching compounds with

optical sensors equipped with recessed lenses. They are liable to dirty

the detector and impair its performance. They may also alter the

property of depiction of your optical device, thus rendering your

measurements inaccurate.

Cleaning the housing and the

mainframe

When cleaning either the mainframe or the housing of your

instrument, only use a dry and very soft cotton tissue on the surfaces

and the numeric pad.

Never open the instruments as they can be damaged. Opening the

instruments puts you in danger of receiving an electrical shock from

your device, and renders your warranty void.

Содержание 81650A





























































































Результаты поиска

Содержание 81650A

Отзывы:

Agilent Technologies 81650A, Руководство пользователя, Страница: 87 / 92

Результаты поиска

Содержание 81650A

Отзывы: