Agilent Technologies 81610A Скачать руководство пользователя страница 99

Страница: 99 / 118

Cleaning Information

What do I need for proper cleaning?

Agilent 81610A/11A/12A/13A/14A Return Loss Module, Fifth Edition

Only use isopropyl alcohol in your ultrasonic bath, as other solvents

may cause damage.

Warm water and liquid soap

Only use water if you are sure that there is no other way of cleaning

your optical device without causing corrosion or damage. Do not use

hot water, as this may cause mechanical stress, which can damage

your optical device.

Ensure that your liquid soap has no abrasive properties or perfume in

it. You should also avoid normal washing up liquid, as it can cover

your device in an iridescent film after it has been air dried.

Some lenses and mirrors also have a special coating, which may be

sensitive to mechanical stress, or to fat and liquids. For this reason we

recommend you do not touch them.

If you are not sure how sensitive your device is to cleaning, please

contact the manufacturer or your sales distributor.

Premoistened cleaning wipes

Use pre-moistened cleaning wipes as described in each individual

cleaning procedure. Cleaning wipes may be used in every instance

where a moistened soft tissue or cotton swab is applied.

Polymer film

Polymer film is available from laboratory suppliers or specialist mail

order companies.

Using polymer film is a gentle method of cleaning extremely sensitive

devices, such as reference reflectors and mirrors.

Infrared Sensor Card

Infrared sensor cards are available from laboratory suppliers or

specialist mail order companies.

With this card you are able to control the shape of laser light emitted.

The invisible laser beam is projected onto the sensor card, then

becomes visible to the normal eye as a round spot.

Take care never to look into the end of a fiber or any other optical

component, when they are in use. This is because the laser can

seriously damage your eyes.

Содержание 81610A























































































































Результаты поиска

Содержание 81610A

Отзывы:

Agilent Technologies 81610A, Руководство пользователя, Страница: 99 / 118

Результаты поиска

Содержание 81610A

Отзывы: