Agilent Technologies 54810A, Руководство для быстрого старта пользователя

Страница: 71 / 132

Using the Oscilloscope
To perform basic user interface operations
3-31
To perform basic user interface operations
• To move the mouse pointer on the screen, move the mouse on the
mouse pad.
If you run out of room on the mouse pad surface, pick up the mouse and set it
down on the mouse pad where you will have room for motion.
• To
click
on an item in the graphical interface, point at that item with the
mouse pointer, then press and release the left mouse button.
• To right-click on an item in the graphical interface, point at that item
with the mouse pointer, then press and release the right mouse button.
You use the right-click operation to access context-sensitive menus. See “To
select a command from a context-sensitive menu” on page 3-34.
• To use a radio button , click to select the desired item.
Radio buttons appear in many different dialog boxes in the oscilloscope
graphical interface. See the Persistence radio buttons in figure 3-19. You can
choose only one option at a time.
• To use a
check box
, click the mouse button with the pointer in the box.
A check mark in the box indicates that item is selected. See the Connect Dots
check box in figure 3-19. To clear the selection, click the mouse button with
the pointer in the box.
• To use a drop-down list box , click the arrow at the right-hand side of
the box. Then click on the desired choice to highlight it.
See the Language selection list box in figure 3-20.
• To use a
spin box
, click the up arrow to increase the value displayed in
the box, and the down arrow to decrease it.
See the Intensity spin box in figure 3-19.
• To move a dialog box , press and hold the left mouse button with the
pointer in the title bar , drag the box to a new position on the screen,
then release the mouse button.
• To close a dialog box , click the “X” symbol in the upper right-hand
corner of the box, or click the Close button in the box.