Agilent Technologies 11713B, Руководство по эксплуатации и обслуживанию, Страница: 106 / 114

106 11713B/C Operating and Service Manual
9
Servicing the Attenuator/Switch Driver
Preparing a Static-Safe Workstation
Electrostatic discharge (ESD) can damage or destroy electronic
components. All works performed on assemblies consisting of
electronic components should be done at a static- safe workstation.
An example of a static- safe workstation is shown below using two
types of ESD protection:
• conductive table mat and wrist strap combination, and
• conductive floor mat and heel strap combination
The methods may be used together or separately. A list of static- safe
accessories and their part numbers is given in table below.
The above can be ordered by contacting any Agilent Sales Office.
Agilent Part Number Description
9300-0797 Set includes:
•
3M static control mat 0.6 m x 1.2 m (2 ft x 4 ft)
•
4.6 m x (115 ft) ground wire
The wrist-strap and wrist-strap cord are no included. They
must be ordered separately.
9300-0865 Ground-wire, 4.6 m (15 ft)
9300-0980 Wrist-strap cord, 1.5 m (5 ft)
9300-1367 Wrist-strap, color black, stainless steel, without cord, has four
adjustable links and a 7 mm post-type connection.
9300-1308 ESD heel-strap (reusable 6 to 12 months)