manualshive.com logo in svg

Agilent Technologies 1147A, Руководство пользователя

Поделиться
Скачать
Agilent Technologies 1147A Скачать руководство пользователя страница 17

17

Service Strategy

For repair and calibration testing, return the 1147A probe to an Agilent 
Service Center. If the probe is under warranty, normal warranty services 
apply. If the probe is not under warranty, repair costs will be applied.

To return the Probe to Agilent Technologies for Service

Call (877) 447- 7278 for further details and the location of your nearest 
Agilent Technologies Service Office or go to www.agilent.com for contact 
information. 

1

Write the following information on a tag and attach it to the probe.

• Name and address of the owner

• Probe model number

• Description of service required or failure indications

2

Retain all accessories.

3

Return the probe in its case or pack the probe in foam or 
other shock- absorbing material and place it in a strong shipping 
container. 

You can use the original shipping materials or order 

materials from an Agilent Technologies Sales Office. If neither are 
available, place 3 to 4 inches of shock- absorbing material around 
the instrument and place it in a box that does not allow movement 
during shipping.

4

Seal the shipping container securely.

5

Mark the shipping container as FRAGILE. In all correspondence, 
refer to the instrument by model number and full serial number.

Содержание 1147A

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды