KNOW YOUR TANK
1
SINGLE ACCESS STEP
8 LIFT LUGS
2
AUTO NOZZLE DISPENSER
9 PRIMARY EMERGENCY VENT
3
PUMP METER
10 MECHANICAL GAUGE
4
HOSE RETRACTOR WITH MAST
11 SECONDARY LEAK INSPECTION PORT
5
PUMP
12 FILL PORT
6
NORMAL VENT
13 SECONDARY EMERGENCY VENT
7
VENT STACK
14 HD SKID w/BOLLARDS & FORK LIFT POCKET
NOTE: LAYOUT OF FITTINGS AND ACCESSORIES WILL VARY FROM MODEL TO MODEL
TANK SERIAL NUMBER
TANK SERIAL NUMBER IS LOCATED AT 3 DIFFERENT LOCATIONS.
1.
ULC NAMEPLATE
2.
SERIAL NUMBER DECAL
3.
PERMANENTLY INSCRIBED ON A LOCK LUG (LOCATED ON ONE OF THE TOP FITTING)
4.
ALTERNATIVELY, BIGGER TANKS (15-25KL) HAVE SERIAL NUMBER INSCRIBED TO THE SADDLE.
NOTE: FOR ANY WARRANTY CLAIMS, A PICTURE OF THE ULC NAMEPLATE ALONG WITH THE SERIAL NUMBER OF THE
TANK MUST BE PROVIDED.
TANK & FUEL COMPATIBILITY
All steel tanks are compatible with all blends of fuels meeting ASTM standards. Ethanol blends from E10 to E100 and
blends of biodiesel from B2 to B100 can be stored in steel tanks. Methanol blends to 100% (neat) are also compatible
with steel. Recent work has been performed to assess the viability of fuel blends using
Isobutanol
. As part of the
research, it was necessary to test the compatibility of Isobutanol with infrastructure materials. The results show that
fuel blended with concentrations up to and including 24% Isobutanol is compatible with steel.
The tank purchaser must rely on the expertise of their own consultants when determining the suitability of a ULC
storage tank for products other than refined petroleum
