P1512115 R8
61
Table 19
Handle Components (continued)
Item
Description
3
3/8" Nylon Washer (USS)
4
3/8" Hex Nut
Figure 41.
Installing the Handle
Install the Cable and Clamps
1. Point the hopper handle toward the hopper (see
).
2. Secure the cable (1) to the handle with a cable clamp (2).
3. Route the cable through the cable rung (3) and around the cable sheaves.
4. Secure the cable (1) to the hopper frame using a cable clamp (2) and the pre-drilled holes in the frame.
5. Test the function of the collapsible hopper cloth controls by raising and lowering the handle. Adjust cable
tension as required.
Table 20.
Cable and Clamp Components
Item
Description
1
1/8" Cable 13' [4.0 m] or 17' [5.2 m] depending on model
2
1/4" Cable Clamp
3
Cable Rung
1
2
3
4
PORTABLE GRAIN BELT CONVEYOR – FIELD LOADER
