50
8210–00009 R1
Section 7.8 – Inspect the Hopper Flashing on page 52
Section 7.9 – Check the Roller Bearings on page 52
Section 7.10 – Check the Rollers on page 52
Section 7.13 – Inspect Belt Lacing on page 56
Annually:
Section 7.11 – Tension the Conveyor Belt on page 52
Section 7.12 – Align the Conveyor Belt on page 54
Section 7.16 – Clean and Wash the Equipment on page 58
When equipped:
Section 7.5 – Check the Gearbox Oil on page 51
2–3 Years:
Section 7.14 – Replace the Belt Lacing on page 57
When equipped:
Section 7.6 – Change the Gearbox Oil on page 51
As Required:
Section 7.17 – Tension the Drive Belts on page 59
Section 7.18 – Align the Drive Belts on page 59
Section 7.19 – Replace the Drive Belts on page 60
Section 7.20 – Repack the Wheel Bearings with Grease on page 60
Section 7.21 – Inspect and Service the Hand Winch and Lift Cable on page 60
Section 7.15 – Replace the Conveyor Belt on page 57
Section 7.22 – Pinion Gear Adjustment on page 61
7.3. Visually Inspect the Equipment
Lock out power before inspecting.
Check the following during a visual inspection:
1. Ensure all guards are in place and in good working order.
2. Examine the conveyor for damage or unusual wear.
3. Check tightness of bolts/nuts, fasteners, and hardware (re-torque if necessary).
4. Be sure all safety decals are in place and are legible.
5. Check that the discharge and intake area are free of obstructions.
6. Inspect all moving or rotating parts to see if anything has become entangled in them. Remove any entangled
material.
7. Inspect hydraulic hoses and fittings for leaks and wear. Fix or replace where necessary.
8. Check wheel bolts are tight and examine tires for gashes, uneven wear, or loss of air pressure. See
for recommended tire pressure and torque information.
S-DRIVE FIELD LOADER – PORTABLE GRAIN BELT CONVEYOR